Applied Vehicle : Large 5 tonnes, vehicles with 25 seat or more
Size : W1500*H1800*D750
Weight : 300kg
Quality : BodySUS / Component AL, FE Plating
Optional shunt : Heated burner, PMC burner, CIRCLE system, Automatic pulse system, Viblator, Back pressure test, triple filtering collector
Explanation : Large DPF with a diameter of 170mm or higher, PMC (more than 1 sphere) workable, compact, 1 ton-top travel system, and small indoor installation in a small area
In case of dry DPF cleaning, which is an effective cleaning method, it ensures excellent DPF cleaning without damage through high-pressure fluoride. It also provides mobile equipment through the miniaturization of DPF equipment, operates without smoke, dust, noise, or secondary contaminants, improves durability, corrosion resistance through the use of full stainless body, and is designed with double stability. Through touch screen automation, it is effective and has reduced working time, eco-friendly, durability, safety and convenience.
Electric coil oven
|Dry cleaning ( recommended cleaning method by MECA, the Manufacturers of Emission Controls Association; conventionally applies to comercial vehicles)|
|※ Time excluding removable time.|
In a highly inflammable pressure system, only 800 degrees of air are injected under pressure. In a short period of time, the entire wall is heated evenly, and there is no damage to the DPF while burning the PM.
By vacuuming the cleaning room and pushing it to a strong pulse pressure in the wall, it is very effective and completely intact.
The high pressure injection nozzle is as close to the wall as possible, drawing a circle throughout all holes and draining Ash.
Each vehicle can be tested for precise back pressure with different exhaust volumes and wind pressures.
By filtering all substances generated during operation in three stages, clean air is emitted without dust, smoke, or smell, and the automatic filter cleaning function enables continuous dust collection.
Double safety features trust the safety and durability of the equipment.
Five minutes after heating type, it cools from 800 to 700 degrees to 50 degrees, so there is no risk of burn, and there is less time to work.
The compact size of the equipment makes it easy to use and convenient to use with the touchpad and automation system
※ Operation time ●Small (40 to 60 minutes) ●Large (DPF 40 to 80 minutes, PMC 100 to 120 minutes)
|DPF Cleaning||precision back pressure test||particulate emission|
PLEASE SELECT THE DESTINATION COUNTRY AND LANGUAGE :